Once you are done with the "object or model" in DESIGN MODE, go to the top left of the window and click on the drop down menu and select the "Manufacture" tap.
Now, we need to tell the equipment the dimension and where our "model" will be positioned to be cut. We do this by creating a "SET UP", select and click "New set up"
Click on the second tap (red circle) to change the dimension of the material by selecting in the first option "Fixed size box"
NOTE: the material and the setup need to be exactly the same size to avoid issues during machining.
These dimensions represent the phisical piece of wax that we will cut from.
By adding offsets we can move the model within the bounduring of the stock. by clicking the "Model Position" dropdown menu and select the "offset from left (-X)" and add some numbers to get around 10~20 mm from the edge of the side of the wax to avoid breaking to wall of the mold.